When should you get your furnace checked?

When should you get your furnace checked?

Your furnace needs to be checked at least once every year to ensure that it is in proper functioning condition. In fact, furnace manufacturers themselves recommend annual inspections as well as maintenance by a technician. In addition, their warranty terms are clear about damage that is caused by improper maintenance.

What to check when furnace is not working?

Furnace Not Working? The 5 Most Common Causes [2019]

  • Step #1: Check your Air Filter.
  • Step #2: Check Your Pilot Light.
  • Step #3: Check Your Thermostat.
  • Step #4: Check The Power.
  • Step #5: Check Your Gas Supply.

How often should you maintain your furnace?

once a year
A gas furnace should be serviced at least once a year, preferably, though, in both the spring and the fall. Annual maintenance, including a thorough examination and cleaning of the parts that commonly malfunction, like the air filter, the fan, the pilot light, and the heat exchanger, can usually prevent these problems.

How often should your furnace be cleaned?

Top 3 Signs Your Furnace Needs a Good Cleaning. As a general rule, the average furnace should be thoroughly cleaned at least once a year. This will not only maintain the efficiency and longevity of your HVAC system, but it’ll also keep your ducts from getting grimy and distributing dust and dirt throughout your home.

How do you know if your furnace pilot light is out?

How to Tell If the Pilot Light Is Out

  1. Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
  2. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
  3. If you don’t see a flame, your pilot light is out.
  4. If there is a flame, check the color.

What does a blinking green light on a furnace mean?

When the green light is flashing fast, it means you have got a working blower system and your furnace is providing heat to the home. If the green light is flashing slowly, it means the furnace is on but there is no request for heat. A continuous light likely means that the IFC circuit board needs replacing.

How do you restart a furnace?

How to Reboot a Furnace

  1. Change the Filter. Before you do anything, check the furnace filter.
  2. Check the Pilot Light. If the pilot light is off, your furnace can’t get the spark necessary to light the boilers.
  3. Turn the Furnace Off and Back On Again.
  4. Call a Certified HVAC Professional.

How do I reset my gas furnace?

How do you restart a gas furnace?

  1. Turn the circuit breaker off and switch the furnace power button off too.
  2. Access the pilot light by removing the access panel.
  3. Turn the gas control valve off and let the gas dissipate for five minutes before turning it back on in order to prevent a fire hazard.

Can you clean a furnace yourself?

Vacuum dust from around the furnace. Clean the blower using a small brush and a vacuum. Clean the blower assembly with water and a mild soap. Vacuum the burner and blower cavity.

What should I do if my furnace is not working?

Sounds like a no-brainer, but if repairs or maintenance work were recently performed on your furnace, and it’s not working for some reason, you may want to check to ensure that it was turned back on. All furnaces have a basic power switch. Simply look for a standard wall switch on or near the furnace and check if it’s in the on or off position.

How much does direct energy charge for furnace maintenance?

Call Direct Energy today and get the comfort of knowing your furnace has been checked by a professional. Making sure you keep a regular maintenance schedule is easy with an Annual Maintenance Plan for just $9.99/Mo. + GST. All of our service technicians are fully licensed and receive ongoing training.

Is there a furnace maintenance plan in Edmonton?

Not combinable with other furnace or air conditioner offers. Direct Energy Home Services provides services in the greater Calgary and Edmonton areas. Maintenance plans are complimentary for the first three months for new customers only.

How can I tell if my furnace is high efficiency?

How to Determine If You Have a High-Efficiency Heating System All manufacturers are required to display the AFUE on boilers and furnaces. Look for a bright yellow label on the outside of the furnace. It should display the AFUE and indicate whether it’s high efficiency or not.

When did they start requiring high efficiency furnaces?

The concept of the “high-efficiency furnace” in popular consciousness dates back to the 1980s. That’s when the National Appliance Energy Conservation Act of 1987 required all new furnaces be 78 percent efficient, meaning 78 percent of the heat went into the home.

How can I tell if my furnace is on or off?

With an oil furnace, check the fuel supply. On an electronic-ignition furnace, turn down the thermostat or turn the power switch off and then on again to reset the ignition control module. Listen for the sound of the spark or watch for the hot surface ignitor to glow (see your owner’s manual). Next check and clean the furnace’s flame sensor.

General Furnace Maintenance. For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner.

What do I need to know about we Energies rebates?

Higher incentives available for income-qualified customers. Residents looking to improve the comfort and energy efficiency of their homes. Discounts available to off-set costs of recommended air-sealing and insulation improvements. Search for a qualified trade ally contractor in your area.

Share via: